Hot Wound Springs & Cold Wound Springs
Hot Wound Springs &
Ace Wire Spring can help with your hot wound spring needs. Hot wound springs usually are made of a spring material with a diameter of 1/2 inch diameter and above. Hot wound is a process used in manufacturing the spring by heating the steel, winding, and tempering to the required properties. The main difference between hot wound springs and other types of springs is that the material (usually steel or high carbon steel) is heated prior to the spring being made.
Ace Wire Spring & Form Company utilizes state of the art equipment to ensure the proper temperature and modulus is achieved in our spring production process. We can help you out with hot wound and cold wound springs depending upon your requirements and applications. We also have the technical experience to offer recommendations for not only the right manufacturing process but selecting the right material, design and specifications.
Compression springs are the most common type of hot wound springs, and are used in multiple items in multiple industries.
For more information or assistance, contact our Design Engineers at 412-331-3353 or fill out our contact form by clicking here.
|© 2015 - All Rights Reserved - Ace Wire Spring & Form Co., Inc.
1105 Thompson Avenue - McKees Rocks, PA 15136-3818
Phone: 412.331.3353 - Toll Free: 800.828.3353 Fax: 412.331.1602